Ningún producto
Estos precios se entienden IVA incluído
Productos más vistos
Marca tus tubos para pegar las plumas...
Funda de la casa Legend pensada para el transporte de hasta 2 arcos...
Kit de pesos para el cuerpo Kinetic Valenz. Fabricados en aluminio y con...
Palas de carbono sobre núcleo de bambú de la casa Kinetic. Selecciona...
Recambio de goma para el freno de cuerda para arcos Hoyt fabricados...
Reposaflechas para arco recurvo fabricado por la casa Avalon. Selecciona...
Diana tipo "saco" de la casa Rinehart. Medidas: 45 x 45 x 25 cm.
Nuevo
Marca tus tubos para pegar las plumas tipo Spin Wing.
Diseñada para pegar las plumas tipo Spin Wing
Plazo de entrega aproximado 14 días para este producto
Advertencia: ¡Últimos artículos en inventario!
Disponible el:
Emplumadora Beiter Tri-Line
Marca tus tubos para pegar las plumas tipo Spin Wing.
Diseñada para pegar las plumas tipo Spin Wing
Recipiente :
* Campos obligatorios
total Cancelar
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter.
With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.
The Tri-Liner ist can be used for different Vane lengths, for Lefthand or Righthand archers, as well as for Recurve or Compound archers.
In fact the positioning ring allows many different adjustements and an exact orientation of nock and fletching.
The included red Tabs are for the exact positioning of the fletching in length and distance to the nock. Additionally they help to draw the line in the correct length.
You may clean the tool also with Acetone if desired.
Please refer to our Instructions Guide to know how to use the Beiter Tri-Liner and achieve best results with it.
The ideal partner for the Tri-Liner is the Beiter Wing-Holder, which is only available for vanes with 1 3/4" length.